Testing And Measuring Equipment

Best in Pune

Testing And Measuring Equipment in Pune

Search Results

Enviornmental Lab And Food Testing Lab


Enviornmental Lab And Food Testing Lab

Rs. 500-30000

Industrial Products | Testing And Measuring Equipment

Shreeji Aqua Treatment Pvt. Ltd. 21a, Shreeji Complex, Nehrunagar Pimpri

Pune, Maharashtra, 411018


Show Distance

Other Products


Full Home Deep Cleaning

Daily Needs | Cleaning Service


Bathroom Cleaning

Daily Needs | Cleaning Service

In any sector of work, test equipment is just as vital as the test itself. It assists us in evaluating equipment performance and identifying any problems that may exist. Test equipment is used to generate signals and capture relative reactions from electrical or electronic DUTs (Devices Under Test). We can readily demonstrate the DUT's appropriate functionality and, moreover, trace defects in the device in this manner.

To determine the DUT's health, a Test Equipment compares its output to the ideal value. The circuit/component of the DUT being tested is given a proper voltage, current, or signal. The measured value is then collected and compared to the intended result.

Test equipment also has its own internal circuit that does the necessary conversions and calculations to provide us with the essential information about the circuit/component being measured. Every piece of test equipment is made to accomplish a certain task.

Why is test equipment required in industrial products?

Because of its exposure to heat, stress, vibration, and other external conditions, the performance of all electrical or electronic equipment tends to decline over time due to fair wear out and component material degradation. As a result, the risk of equipment failure and electric shock grows with time. As a result, it is usually recommended that all electrical/ electronic equipment be calibrated and tested on a regular basis.

If we're talking about electronics measurement, we can't ignore the relevance of voltage/current/capacitance/resistance/inductance, and so on. If circuit testing or fault discovery is required, all of the above-mentioned electrical quantities must be considered. That is why, in order to assess the condition or defect of all circuit components, we must consider all voltage levels and verify their accuracy.

Today, if we consider practical electrical/electronics engineering, i.e. the field job, we should be able to use a variety of pieces of test equipment, ranging from the very simple and inexpensive tester (a test light consisting of only a light bulb and a test lead) to complex and sophisticated test equipment such as the Digital Oscilloscope.

What are the different types of electrical or electronic test equipment manufactured by testing equipment manufacturers near me in Pune ?

Test Equipment comes in a variety of shapes and sizes, each with its own set of capabilities. The following are some of the most popular and prevalent types of test equipment that are manufactured in Pune:

  • Digital Multimeter
  • Clamp Meter (Tong Tester)
  • Owen Bridge Circuit
  • Analog Voltmeter
  • Digital Voltmeter
  • Shock Pulse Meter
  • Digital Oscilloscope
  • Wee Megger
  • Stroboscope
  • Electric Motor Checker (EMC)
  • Instrumentation Amplifier
  • Signal Generator
  • Spectrum Analyzer
  • Neon tester
  • Frequency Counter
  • Resistance Temperature Detector (RTD)

What are the common applications of testing equipment in Pune ?

Electrical or electronic testing equipment can be used for a variety of applications and electrical tests. The following is a list of the most popular (but not exhaustive) uses for test equipment:

  • Voltage, current, resistance, inductance, capacitance, and other basic electrical/electronic parameters are checked.
  • To ensure that wires and equipment are properly insulated in order to avoid electric shock or fir
  • Ensure that the equipment is in good working order.
  • Defect detection at the system and component levels.
  • To see if there is any continuity or conductivity.

What are the general precautions while working with testing equipment?

When dealing with testing equipment, use the following precautions:

  • To execute a successful test, always utilise the appropriate test equipment, as incorrect testing equipment might result in damage to the testing bay, facility, or equipment, as well as loss of life.
  • It's also a good idea to double-check the compatibility of the probes and leads. An improper probe or connector can cause an arc, a short circuit, or an electric shock.
  • It's also a good idea to double-check the compatibility of the probes and leads. An improper probe or connector can cause an arc, a short circuit, or an electric shock.
  • You should be able to operate the test equipment that is being used.
  • If the equipment does not need to be turned on, turn off the power.
  • First, perform a visual inspection.
  • To ensure your safety, check the equipment's grounding before turning on the system.
  • Before turning on the system, inspect the wire insulation.
  • When working on a live circuit, wear electrical PPE (Personal Protective Equipment).

What are the different types of measuring equipment used in the industrial sectors in Pune ?

Measuring equipment is a device that is used to determine a quantity's unit value. Weight, temperature, duration, time, and other variables all play a role here. For example, you can use a ruler to measure the length of a branch, which means the quantity being measured is the length and the measuring tool is a ruler.

Measurement errors will occur if measuring instruments are used incorrectly. As a result, new users of specific measuring equipment should first read the measuring instrument guidelines.

There are many different sorts of measuring equipment, each with its own set of purposes. Some measuring tools are widely utilised by the general public, while others are used only by a specific set of people. A few of the various types of measuring instruments and their functions are mentioned below:

  • Ruler: A ruler is a long measuring equipment used to determine an object's length. Rulers are typically constructed of iron, mica, or wood. This measuring device is widely utilised in the community, and it is even regarded as a must for schoolchildren. Rulers are available in lengths ranging from 10 cm to 100 cm. The most common ruler length is 30 cm.
  • Roll meter: A roll metre is a tool that is used to determine the length of an object. This equipment is similar to a ruler, with the exception that the roll metre can measure up to 50 metres. In the furniture industry, this equipment is used to measure wood or boards for furniture. There's also a roll metre that can measure up to 100 metres, although it's shaped differently than the one shown above.
  • Elbow meter: An elbow ruler is a measuring tool that is used to determine the length and guarantee that the right angle is 90 degrees. The elbow ruler can only check a 90-degree angle, but there is another type of elbow ruler with an angle-adjusting mechanism that allows it to be turned to check the angle of the object. Typically, this device is used in the furniture sector.
  • Micrometer: A micrometer can also be used to determine an object's diameter and thickness. This tool, however, has higher accuracy than callipers, with a 0.01 mm accuracy. To measure the diameter and thickness of tiny objects, such as coins, a micrometer is required.
  • Scale: A scale is a measuring device that is used to determine an object's weight or mass. Sitting scales, body scales, three-arm scales, digital scales, hanging scales, and other types of scales are available. The scale seen in the image is a sort of sitting scale that is commonly used to weigh food ingredients and other industrial items. Scales come in a variety of units, depending on the type.
  • Thermometer: A thermometer is a device that can be used to measure temperature. The temperature in a thermometer is measured in Celsius (°C). Thermometers are available in a wide range of designs and sizes. The thermometer shown above is an example of the most widely used type in hospitals and laboratories. An infrared thermometer, which is intended to test body temperature before entering a crowded venue, is another form of thermometer that may be encountered during the COVID-19 epidemic.

How OnlyDesi can help in finding the best testing and measuring equipment manufacturers near me in Pune ?

OnlyDesi is a platform that allows all users to find a variety of testing and measuring equipment manufacturers in one place.

OnlyDesi is a trustworthy website that lists a large number of verified testing and measuring equipment manufacturers near me. OnlyDesi has a wide range of testing and measuring equipment dealers near me to choose from based on your location. You can search like ‘testing equipment manufacturers near me,’ ‘measuring equipment manufacturers near me,’ to narrow your query. If you are thinking of purchasing testing and measuring equipment in bulk for your industry, you should better go to the OnlyDesi website or get the OnlyDesi app, which is available for both Android and iOS for getting the best testing and measuring equipment manufacturers near me.

Apply numerous parameters, such as pricing, ratings, and location, to locate the best testing and measuring equipment manufacturers near me in Pune that meets your standards and meets all of your needs.


On large purchase orders for industrial sectors, most testing and measuring equipment manufacturers near me provide various deals and discounts.
Many testing and measuring equipment manufacturers near me will offer a demonstration to explain how the testing and measuring equipment works so you can make an educated selection.
It is hard to tell an exact price range for the testing and measuring equipment you are wishing to buy. The price will vary on the type of equipment you are buying.
Yes, the testing and measuring equipment manufacturers near me provide services if any of the equipment has any damage or fault. They might alter the equipment if it is necessary.
Yes, all the testing and measuring equipment manufacturers near me in Pune listed on OnlyDesi are genuine. They only provide testing and measuring equipment with ISI certification.

Review Section For Only Desi

Download the OnlyDesi App on Your Mobile and Get Unlimited Exploration

Download the Onlydesi App

Covid-19 Updates